| TÍNH NĂNG LƯU LƯỢNG KHÔNG KHÍ (AIR FLOW FEATURES) |
|---|
| Hướng Luồng Không Khí (Air Flow Direction) | 2 Way Direction |
| Tính Năng Lưu Lượng Không Khí Khác (Other Air Flow Features) | Air Circulation :740 Cfm, Personal Airflow Creation, Manual Horizontal Airflow Direction Control, 31 Ft Airflow, Wide And Long Airflow Vane (Air Circulation :740 Cfm, Personal Airflow Creation, Manual Horizontal Airflow Direction Control, 31 Ft Airflow, Wide And Long Airflow Vane) |
| Cài Đặt Tốc Độ (Speed Setting) | Không (No) |
| CHẾ ĐỘ (MODES) |
|---|
| Hút Ẩm (Dehumidification) | Không (No) |
| Chế Độ Hoạt Động (Operating Mode) | Powerful Mode, Temperature Wave, Econavi Dual Sensor, Inverter Control, Automatic Operation Mode (Heat Pump), Soft Dry Operation Mode, Econavi Mono Sensor, Automatic Operation Mode (Cooling), Auto Comfort Dual And Mono Sensor, Mild Dry Cooling |
| Chế Độ Turbo (Turbo Mode) | Không (No) |
| Chế Độ Khô (Dry Mode) | Có (Yes) |
| Chế Độ Ngủ (Sleep Mode) | Có (Yes) |
| Chế Độ Mát (Cool Mode) | Có (Yes) |
| TÍNH NĂNG TIỆN LỢI (CONVENIENCE FEATURES) |
|---|
| Tự Động Làm Sạch (Auto Clean) | Không (No) |
| Hẹn Giờ (Timer) | Có (Yes) |
| Jet Cool | Không (No) |
| Tự Chẩn Đoán (Self Diagnosis) | Có (Yes) |
| Các Tính Năng Tiện Lợi Khác (Other Convenience Features) | Quiet Mode, 24 Hrs On And Off Real Setting Timer, Lcd Wireless Remote Controller, 24 Hrs Dual On And Off Real Setting Timer, 12 Hrs On And Off Setting Timer (Quiet Mode, 24 Hrs On And Off Real Setting Timer, Lcd Wireless Remote Controller, 24 Hrs Dual On And Off Real Setting Timer, 12 Hrs On And Off Setting Timer) |
| Fuzzy Logic | Không (No) |
| Hot Cold | Không (No) |
| Khởi Động Lại Tự Động (Auto Restart) | Có (Yes) |
| Bảng Hiển Thị Phía Trước (Front Panel Display) | Có (Yes) |
| Tính Năng Bổ Sung (Additional Features) | Refrigerant Pipe Diameter: Liquid Side - 9.52 Mm, Gas Side - 19.05 Mm, Eco Tough Casing, Long Piping: 25 M, Pipe Length: Minimum - 3 M, Maximum - 30 M
Pipe Length For Additional Gas: 7.5 M
Pipe Extension: Chargeless Pipe Length - 7.5 M, Maximum Elevation Length - 20 M, Additional Gas Amount: 40 G/M (Refrigerant Pipe Diameter: Liquid Side - 9.52 Mm, Gas Side - 19.05 Mm, Eco Tough Casing, Long Piping: 25 M,
Pipe Length: Minimum - 3 M, Maximum - 30 M
Pipe Length For Additional Gas: 7.5 M
Pipe Extension: Chargeless Pipe Length - 7.5 M, Maximum Elevation Length - 20 M,
Additional Gas Amount: 40 G/M) |
| DỊCH VỤ LẮP ĐẶT (SERVICES INSTALLATION) |
|---|
| Chi Tiết Lắp Đặt (Installation Details) | Installation Of Air-Conditioner Is Charged Extra To Customer At The Time Of Installation And Needs To Be Paid Directly To The Service Engineer.
Standard Installation Of Split Ac Covers Only
Split Ac:-
1.Drilling Of Hole In Brick Wall For Taking Out The Pipes
2.Fixing Hole Sleeve & Cap
3.Fixing The Indoor And Outdoor Unit.
4.Connecting Indoor And Outdoor Units Using Standard Kit Provided By Manufacturer (At An Additional Cost, Unless Specified Otherwise).
Wrapping The Pipe With Seasoning Tape.
5.Connection To Stabilizer Or Power Point In The Range Of Power Cord Provided By Manufacture.
6.Temperature/Performance Check & Demo And Maintenance Tips Filling The Details In Warranty Card.
Not Covered In Installation:-
1.Out Door Unit Stand.
2.Extra Copper Wire If Any.
3.Drain Pipe Extension If Any.
4.Plumbing And Masonry Work.
5.Wiring Extension From Meter To Site, Power Point/Mcb Fitting And Any Other Electrical Work,Carpentry Work.
6.Dismantling/Shifting Of Old Ac`S Masonry, Core Cutting Fabrication And Electrical |
| Dịch Vụ Bao Gồm Trong Cài Đặt Cơ Bản (Services Included In Basic Installation) | Standard Installation Of Split Ac Covers Only
Split Ac:-
1.Drilling Of Hole In Brick Wall For Taking Out The Pipes
2.Fixing Hole Sleeve & Cap
3.Fixing The Indoor And Outdoor Unit.
4.Connecting Indoor And Outdoor Units Using Standard Kit Provided By Manufacturer (At An Additional Cost, Unless Specified Otherwise).
Wrapping The Pipe With Seasoning Tape.
5.Connection To Stabilizer Or Power Point In The Range Of Power Cord Provided By Manufacture.
6.Temperature/Performance Check & Demo And Maintenance Tips Filling The Details In Warranty Card.
Not Covered In Installation:-
1.Out Door Unit Stand.
2.Extra Copper Wire If Any.
3.Drain Pipe Extension If Any.
4.Plumbing And Masonry Work.
5.Wiring Extension From Meter To Site, Power Point/Mcb Fitting And Any Other Electrical Work,Carpentry Work.
6.Dismantling/Shifting Of Old Ac`S Masonry, Core Cutting Fabrication And Electrical |
| Bảo Hành Lắp Đặt (Installation Warranty) | 1 Year For The Product & 5 Years For The Compressor |
