TÍNH NĂNG LƯU LƯỢNG KHÔNG KHÍ (AIR FLOW FEATURES) |
---|
Tính Năng Lưu Lượng Không Khí Khác (Other Air Flow Features) | Air Circulation (Cooling):16 Meter Cube/Min, Optimal Single Blade, Air Direction Control (Left/Right):Manual, Natural Breeze |
Tốc Độ Quạt (Fan Speed Steps) | 4 |
Cài Đặt Tốc Độ (Speed Setting) | Không (No) |
Auto Air Swing | Hiện Tại, Auto Air Swing Up Down (Present, Auto Air Swing Up Down) |
Hướng Luồng Không Khí (Air Flow Direction) | 4-Way Direction |
TÍNH NĂNG TIỆN LỢI (CONVENIENCE FEATURES) |
---|
Tự Động Làm Sạch (Auto Clean) | Có (Yes) |
Hẹn Giờ (Timer) | Có (Yes) |
Jet Cool | Không (No) |
Tự Chẩn Đoán (Self Diagnosis) | Có (Yes) |
Các Tính Năng Tiện Lợi Khác (Other Convenience Features) | Beep On / Off, Indoor Temperature Display: 3 Led Type, 24 Hrs Timer, Smart Installation (Beep On / Off, Indoor Temperature Display: 3 Led Type, 24 Hrs Timer, Smart Installation) |
Fuzzy Logic | Không (No) |
Hot Cold | Không (No) |
Khởi Động Lại Tự Động (Auto Restart) | Có (Yes) |
Bảng Hiển Thị Phía Trước (Front Panel Display) | Không (No) |
Tính Năng Bổ Sung (Additional Features) | Piping Length (Max, M):20, Piping Height (Max, M):8, Svc Valve (Liquid (Odxl)):6.35 Mm, Svc Valve (Gas (Odxl)):15.8 Mm |
DỊCH VỤ LẮP ĐẶT (SERVICES INSTALLATION) |
---|
Chi Tiết Lắp Đặt (Installation Details) | Installation Of Air-Conditioner Is Charged Extra To Customer At The Time Of Installation And Needs To Be Paid Directly To The Service Engineer.
Standard Installation Of Split Ac Covers Only
Split Ac:-
1.Drilling Of Hole In Brick Wall For Taking Out The Pipes
2.Fixing Hole Sleeve & Cap
3.Fixing The Indoor And Outdoor Unit.
4.Connecting Indoor And Outdoor Units Using Standard Kit Provided By Manufacturer (At An Additional Cost, Unless Specified Otherwise).
Wrapping The Pipe With Seasoning Tape.
5.Connection To Stabilizer Or Power Point In The Range Of Power Cord Provided By Manufacture.
6.Temperature/Performance Check & Demo And Maintenance Tips Filling The Details In Warranty Card.
Not Covered In Installation:-
1.Out Door Unit Stand.
2.Extra Copper Wire If Any.
3.Drain Pipe Extension If Any.
4.Plumbing And Masonry Work.
5.Wiring Extension From Meter To Site, Power Point/Mcb Fitting And Any Other Electrical Work,Carpentry Work.
6.Dismantling/Shifting Of Old Ac`S Masonry, Core Cutting Fabrication And Electrical |
Dịch Vụ Bao Gồm Trong Cài Đặt Cơ Bản (Services Included In Basic Installation) | Standard Installation Of Split Ac Covers Only
Split Ac:-
1.Drilling Of Hole In Brick Wall For Taking Out The Pipes
2.Fixing Hole Sleeve & Cap
3.Fixing The Indoor And Outdoor Unit.
4.Connecting Indoor And Outdoor Units Using Standard Kit Provided By Manufacturer (At An Additional Cost, Unless Specified Otherwise).
Wrapping The Pipe With Seasoning Tape.
5.Connection To Stabilizer Or Power Point In The Range Of Power Cord Provided By Manufacture.
6.Temperature/Performance Check & Demo And Maintenance Tips Filling The Details In Warranty Card.
Not Covered In Installation:-
1.Out Door Unit Stand.
2.Extra Copper Wire If Any.
3.Drain Pipe Extension If Any.
4.Plumbing And Masonry Work.
5.Wiring Extension From Meter To Site, Power Point/Mcb Fitting And Any Other Electrical Work,Carpentry Work.
6.Dismantling/Shifting Of Old Ac`S Masonry, Core Cutting Fabrication And Electrical |
Bảo Hành Lắp Đặt (Installation Warranty) | 1 Year For The Product & 5 Years For The Compressor |