| TÍNH NĂNG TIỆN LỢI (CONVENIENCE FEATURES) |
|---|
| Tự Động Làm Sạch (Auto Clean) | Không (No) |
| Hẹn Giờ (Timer) | Có (Yes) |
| Jet Cool | Không (No) |
| Tự Chẩn Đoán (Self Diagnosis) | Có (Yes) |
| Các Tính Năng Tiện Lợi Khác (Other Convenience Features) | Anti-Fungal Clean |
| Fuzzy Logic | Không (No) |
| Hot Cold | Không (No) |
| Khởi Động Lại Tự Động (Auto Restart) | Có (Yes) |
| Bảng Hiển Thị Phía Trước (Front Panel Display) | Có (Yes) |
| Tính Năng Bổ Sung (Additional Features) | Connecting Cable: 3.5 M, Connecting Pipe Length: 3.5 M, Connecting Pipe Type: Cu - Cu, Copper Tubes: Inner Grooved (Connecting Cable: 3.5 M, Connecting Pipe Length: 3.5 M, Connecting Pipe Type: Cu - Cu,
Copper Tubes: Inner Grooved) |
| DỊCH VỤ LẮP ĐẶT (SERVICES INSTALLATION) |
|---|
| Chi Tiết Lắp Đặt (Installation Details) | Installation Of Air-Conditioner Is Charged Extra To Customer At The Time Of Installation And Needs To Be Paid Directly To The Service Engineer.
Standard Installation Of Split Ac Covers Only
Split Ac:-
1.Drilling Of Hole In Brick Wall For Taking Out The Pipes
2.Fixing Hole Sleeve & Cap
3.Fixing The Indoor And Outdoor Unit.
4.Connecting Indoor And Outdoor Units Using Standard Kit Provided By Manufacturer (At An Additional Cost, Unless Specified Otherwise).
Wrapping The Pipe With Seasoning Tape.
5.Connection To Stabilizer Or Power Point In The Range Of Power Cord Provided By Manufacture.
6.Temperature/Performance Check & Demo And Maintenance Tips Filling The Details In Warranty Card.
Not Covered In Installation:-
1.Out Door Unit Stand.
2.Extra Copper Wire If Any.
3.Drain Pipe Extension If Any.
4.Plumbing And Masonry Work.
5.Wiring Extension From Meter To Site, Power Point/Mcb Fitting And Any Other Electrical Work,Carpentry Work.
6.Dismantling/Shifting Of Old Ac`S Masonry, Core Cutting Fabrication And Electrical |
| Dịch Vụ Bao Gồm Trong Cài Đặt Cơ Bản (Services Included In Basic Installation) | Standard Installation Of Split Ac Covers Only
Split Ac:-
1.Drilling Of Hole In Brick Wall For Taking Out The Pipes
2.Fixing Hole Sleeve & Cap
3.Fixing The Indoor And Outdoor Unit.
4.Connecting Indoor And Outdoor Units Using Standard Kit Provided By Manufacturer (At An Additional Cost, Unless Specified Otherwise).
Wrapping The Pipe With Seasoning Tape.
5.Connection To Stabilizer Or Power Point In The Range Of Power Cord Provided By Manufacture.
6.Temperature/Performance Check & Demo And Maintenance Tips Filling The Details In Warranty Card.
Not Covered In Installation:-
1.Out Door Unit Stand.
2.Extra Copper Wire If Any.
3.Drain Pipe Extension If Any.
4.Plumbing And Masonry Work.
5.Wiring Extension From Meter To Site, Power Point/Mcb Fitting And Any Other Electrical Work,Carpentry Work.
6.Dismantling/Shifting Of Old Ac`S Masonry, Core Cutting Fabrication And Electrical |
| Bảo Hành Lắp Đặt (Installation Warranty) | 1 Year For The Product & 5 Years For The Compressor |
